Specifications

3. The Moneris Vx810 Hardware
46 Moneris Vx810 Duet Operating Manual v1.1.01
IMPORTANT: Leave the chip card in the reader for the entire transaction.
3. When the "Remove Card" prompt appears, pull the card gently out of the chip card reader.
3.8. The Integrated Printer
A thermal printer is integrated with the Moneris 810 Duet base. It prints black text on white, one-part
thermal paper.
To order additional paper rolls, see Assistance. To load a paper roll in the printer, see Loading
Paper in the Printer.
3.9. The External PINpad
If you ordered the optional Vx810 external PINPad, please confirm that you
have received the PINPad and the attached PINPad power cable.
If an optional Vx810 external PINPad is connected to the Vx810 Duet and
your merchant account is configured for it, customers must use the PINpad
during transactions requiring their input to key in information while you keep
the terminal in front of you.
3.9.1. Setting up the External PINpad
1. Locate the PINPad cable (attached to the external PINPad).
2. Plug the RS232 connector into the RS232 port on the back of the terminal base. Plug the power
connector into the power port (
) on the back of the base in the unlock position. Turn the plug counter-
clockwise to put it in the lock position.
3. Locate the power cable and the power adaptor cable. Plug the power cable into the power adaptor
cable. Plug the other end of the power adaptor cable into the power port box in the middle of the PINPad
power cable. Insert the connector at a right angle to the box then turn it counter-clockwise to lock it in
place.
4. Plug the other end of the power cable into a power source.