Specifications

4. Configuring Your Terminal
54 Moneris Vx810 Duet Operating Manual v1.1.01
IP Address
Subnet Mask
Gateway IP Add
DNS1 IP Address
DNS2 IP Address (your Ethernet network may not require this parameter)
h. Select Exit then select Yes to save changes. CommServer restarts and the terminal reboots back to
the applications menu.
4. Reconnect the Ethernet cable to the base and the wall jack.
4.2.4. Configuring Dial Backup Support for IP
Dial Communications as Automatic Backup for IP
With this configuration, the terminal will automatically attempt to use dial communications when
Ethernet communication is not available.
1. Finish setting up communications for IP as above.
2. Plug in the dial cable and follow the steps for Dial Setup under Configuring Dial Communications
.
Note: Dial communications must be configured for Dial Backup to work.
3. On the applications menu, select DEBIT & CREDIT.
4. Press OK to access the CONFIGURATION menu.
5. Select Setup, key in your manager password and press OK.
6. Scroll down and select Host.
7. Select Next until “Backup Support” appears.
8. Select Edit, select Next until “Auto Backup” appears then select Slct.
9. Select Exit then select OK to save changes.
10. Press CANC ANNUL then press the * (ASTERISK) key to return to the applications menu.
Other Backup Support Options
None - Dial backup is disabled (default)
Prompt Backup - The terminal prompts for confirmation before attempting dial
Switch Backup - Do Not Use
Use Backup - Do Not Use
4.3. Configuring Your Merchant ID and Terminal ID
To configure your Merchant ID and Terminal ID:
1. On the applications menu, select DEBIT & CREDIT.
"Activating App" appears followed by the transactions menu.
2. Press OK to access the CONFIGURATION menu.
3. Select Setup, key in the manager password and press OK.
4. Scroll down and select Merchant.
“Term Id” appears.