Specifications

4. Configuring Your Terminal
58 Moneris Vx810 Duet Operating Manual v1.1.01
4.7.4. Tip Percentage on Purchases
To configure Tip Percentage:
1. Set the Tip % nn.nn
parameter to a value greater than 0 (e.g., for 15%, key in 1500).
2. Set the Tip Processing
parameter to On - Prompt.
Note: Tip Percentage is skipped on Signatureless Transactions
.
IMPORTANT: Tip Percentage is not available when an external PINPad is connected to your
terminal. On transactions with magnetic stripe credit cards, tip is automatically added WITHOUT
customer confirmation.
For Tip Processing customer entry procedures, see Entering a Tip Amount.
4.8. Configuring the Cashback Feature
4.8.1. Cashback Amount Prompting on Debit Transactions
To enable Cashback prompting:
1. Set the CashBack Option
parameter to On.
2. Make sure the Show CB Choices
parameter is set to On.
IMPORTANT: The choice of manually keying in another Cashback amount is not available when
an external PINPad is connected to your terminal. The available selections on the PINPad are four
pre-set non-configurable amounts.
4.8.2. Changing Cashback Amounts
To change the pre-set Cashback amounts:
1. Set any of the Amt 1
, Amt 2 and Amt 3 parameters to new amounts of your choice.
2. Make sure the CashBack Option
parameter is set to On.
4.8.3. Setting the Cashback Limit
To change the pre-set Cashback limit:
• Set the Amt Limit
parameter to a new amount of your choice.
For Cashback customer entry procedures, see Entering a Cashback Amount.
4.9. Configuring Clerk ID Prompting and Clerk Sub-
Totalling
4.9.1. Clerk ID Prompting
To enable the Clerk ID prompt:
• Set the Clrk/Srvr Mode
parameter to Prompt.
For the Clerk ID prompting procedure, see Entering the Clerk ID.
4.9.2. Using a Default Clerk ID
To automatically use the same Clerk ID for all transactions (no ID prompting):
1. Set the Clrk/Srvr Mode
parameter to None.