Specifications

5. Financial Transactions
66 Moneris Vx810 Duet Operating Manual v1.1.01
5.3. Card Entry Options
5.3.1. Magnetic Stripe Cards - Swipe
• Look for the magnetic stripe on the back of the card.
• When “Swipe Card:”, “Insert or Swipe Card:” or “Swipe, Tap, or Insert Card:” appears on the
terminal or PINPad, swipe the card on the magnetic stripe reader and follow the prompts.
5.3.2. Chip Cards - Insert
• Look for the chip on the card.
• When “Swipe Card:” or “Insert or Swipe Card:” appears on the terminal or PINPad, you or the
customer inserts the card in the chip card reader.
Note: If an optional external PINpad is connected to the Vx810 Duet, the card must be inserted in the
external PINPad’s chip card reader.
• When prompted, the customer keys in his/her PIN.
• The chip card must remain inserted in the reader until the “Remove Card” prompt appears on the
display.
Note: Unless the device prompts otherwise, do not swipe a chip card even if it has a magnetic stripe.
5.3.3. Contactless Cards - Tap
• Look for the MasterCard PayPass® or Visa payWave™ label on the card.
• When “Swipe, Tap, or Insert Card:” appears on the terminal or PINPad, the customer taps the card on
the modular contactless reader.
Note: The card does not need to touch the reader but must be within 0.5 in. (1.1 cm) of it. The card
must be tapped by itself (i.e., not in a wallet).
• If the card does not work or is unsupported, try inserting it in the chip card reader (if it is a chip card)
or swiping the card on the terminal.
5.3.4. Manual Entry
See Manually Processing Credit Card Transactions.
5.4. Transaction Procedures
Follow the procedures in this section to process these transactions:
• Purchase
• Refund
• Correction
• Pre-Authorization
• Pre-Authorization Completion
• Pre-Authorization Deletion
• Advice
• Purchase on a Corporate Card
• Payment on a Private Label (Purchasing) Card