Specifications

V
X
810 REFERENCE GUIDE 21
CHAPTER 3
Setup
This chapter describes the setup procedure for V
x
810, in the following sections:
• Selecting Location
• Unpacking the Shipping Carton
• Examining the V
x
810 Features
• Installing/Replacing MSAM Cards
• Options
• Cable Connections
• Power Supply
• Using the Primary Smart Card Reader
• Using the Magnetic Stripe Card Reader
• Using the V
x
810 CTLS Module
Selecting
Location
Use the following guidelines to select a location for the V
x
810.
Ease of Use • Select a location convenient for both merchant and cardholder.
• Select a flat support surface, such as a countertop or table.
• Select a location near a power outlet and the other device, ECR, or computer
connected to the V
x
810. For safety, do not string cables or cords across a
walkway.
Environmental
Factors
• Do not use the device where there is high heat, dust, humidity, moisture, or
caustic chemicals or oils.
• Keep the device away from direct sunlight and anything that radiates heat,
such as a stove or a motor.
• Do not use the device outdoors.
CAUTION
The device is not waterproof or dustproof, and is intended for indoor use only.
Any damage to the device from exposure to rain or dust can void warranty.