Specifications

SETUP
Options
V
X
810 REFERENCE GUIDE 27
4 Install the metal plate onto the back of the RFID canopy and V
x
810.
Figure 9 Installing the Metal Plate
5 Use the locking screws to lock the metal plate into position.
Figure 10 Installing the Locking Screws
NOTE
The metal plate has two tabs at the wide end that fit into slots in the V
x
810 CTLS
module, and two tabs at the narrow end that fit into ribs in the V
x
810 PIN pad’s
SD card compartment.
NOTE
First insert the fine-threaded black machine screw into the V
x
810 PIN pad. Then
install the 3 sharp-threaded self-tapping machine screws into the V
x
810 CTLS
module. The self-tapping screws will require a significant amount of force to
install. Use the appropriate-sized screwdriver to avoid damaging the screw
heads or the V
x
810 PIN pad and V
x
810 CTLS module.