Specifications

SETUP
Cable Connections
30 V
X
810 REFERENCE GUIDE
Cable
Connections
The V
x
810 has six general cabling scenarios, depending on what the device
connects to:
• Other Devices
• RS-232 Connection with External Power Brick
• Standard USB Connection
• USB Download Support with External Power Brick
• Powered USB
• Ethernet Connection with External Power Brick
Other Devices
V
x
810 will connect to another device via a straight cable. There is a minimum
power requirement for the V
x810, currently specified as 3.5W. In cases where the
other device is only able to provide a 7V DC output to power the V
x810, the other
device must be able to source at least 0.5A of current. Otherwise, proper
functioning of the V
x810 is not guaranteed.
Figure 16 Connection with Another Device
RS-232 Connection
with External Power
Brick
A special dongle cable is used, where one end of the cable plugs into the V
x
810
while the other end terminates to a female DB-9 connector housing (which is used
to connect to an RS-232 serial port). On the housing, a DC jack is provided to
connect to an external power brick. This is the generic cable for all RS-232-based
hosts.
Figure 17 RS-232 Connection with External Power Brick