Specifications

SYSTEM MODE
System Mode Menus
54 V
X
810 REFERENCE GUIDE
SYS MODE TERM INFO
CERT 234000
HEAP 772
STACK 1708
NEXT CERT F3
©
• CERT indicates the certificate numbers
pertaining to the device. Pressing
NEXT CERT
(F3)
will show the other certificate numbers.
• HEAP indicates the memory designation used by
the OS.
• STACK indicates the memory set aside by the OS
for running tasks.
TERMINAL INFO X DIAGS AND LOGS
SYS MODE MENU 2
MEMORY FUNCTIONS F2
TERMINAL INFO F3
CLOCK F4
©ª
To view device configuration information, select
TERMINAL INFO (F3).
To abort any action at any step, press
CANCEL.
SYS MODE MENU
SYSTEM INFO F2
DIAGS AND LOGS F3
To perform system diagnostic tests and view log
information, select
DIAGS AND LOGS (F3).
SYS MODE DIAGS
PRINTER DIAG F2
KEYBOARD DIAG F3
MAG CARD DIAG F4
ª
To run a test on the installed printer, select PRINTER
DIAG (F2)
.
To run a test on the keypad, select
KEYBOARD DIAG
(F3)
.
To run a test on the magnetic stripe reader (MSR),
select MAG CARD DIAG (F4).
SYS MODE DIAGS
SCREEN DIAG F2
IPP DIAG F3
SMART CARD DIAG F4
©ª
To perform a diagnostic test on the screen, select
SCREEN DIAG (F2).
To perform a diagnostic test on the internal PIN pad,
select
IPP DIAG (F3).
To run a test on any inserted ICC or SAM cards,
select
SMART CARD DIAG (F2).
SYS MODE DIAGS
REMOTE DIAGS F2
DEBUGGER F3
HASH F4
©ª
The REMOTE DIAGS (F2) functions are reserved for
VeriFone use only.
To use the debugging tool, select
DEBUGGER (F3).
To use the hash tool, select HASH (F4). The hash
tool is used for verifying the OS binary image.
Table 9 System Mode Menu 2 (continued)
Display Action