Specifications

SYSTEM MODE
System Mode Menus
60 V
X
810 REFERENCE GUIDE
SYS MODE MENU
SYSTEM INFO F2
DIAGS AND LOGS F3
To perform system diagnostic tests and view log
information, select
DIAGS AND LOGS (F3).
SYS MODE DIAGS
REMOTE DIAGS F2
DEBUGGER F3
©ª
To use the debugging tool, select DEBUGGER (F3).
The debugging tool is included in the SDK, but is not
stored in the terminal memory of a factory unit. It
must be signed, downloaded, and authenticated
before it can be used.
SYS MODE FILE
FILE GROUP nn
Type the Group ID (valid values are 1 to 15) of the
files you want to debug. Then press
ENTER.
LOAD DBMON.OUT
This message is displayed when the debugger tool
is run.
SYSTEM MODE FILE
GROUP nn PASSWORD
_ _ _ _ _ _ _ _ _ _
To continue, enter the required password.
TERMINAL INFO X DIAGS AND LOGS X ERROR LOG
SYS MODE MENU 2
MEMORY FUNCTIONS F2
TERMINAL INFO F3
CLOCK F4
©ª
To view device configuration information, select
TERMINAL INFO (F3).
To abort any action at any step, press
CANCEL.
SYS MODE MENU
SYSTEM INFO F2
DIAGS AND LOGS F3
To perform system diagnostic tests and view log
information, select
DIAGS AND LOGS (F3).
Table 9 System Mode Menu 2 (continued)
Display Action