User Manual

6
Getting Started — continued
Please read these instructions carefully before using the
EasyFlex
®
.
1. Unpack lamp carefully, removing all packaging material, and confirm
you have all parts shown in the diagram. For your convenience, the
bulb is already inserted in the socket.
2. Remove all pieces from box being careful with the wiring that runs
through the base and shafts.
3. Locate the two screws and tightening tool in the plastic bag and set
aside.
Tightening tool
VF02_MAN_Rev21.indd 6 8/19/15 1:43 PM