User Manual

9
Correctly Seated Bulb Incorrectly Seated Bulb
No Gap
Notice
Large Gap
Fig. 7
ALWAYS UNPLUG THE LAMP AND ALLOW SUFFICIENT
TIME FOR THE BULB TOP COOL BEFORE PERFORMING BULB
INSTALLATION OR REPLACEMENT.
CAUTION:
Bulb Replacement
Fig. 5
Fig. 6
A
D
B
C
Removal
1. Unplug the lamp from the power source.
2. To access the bulb, remove the grid
diffuser by depressing the tab and lifting it
out. (See Fig. 5.)
3. Firmly hold the bulb base (A) and pull
the bulb (B) from the socket (C) in
an upward and outward motion.
Installation
1. Unplug the lamp from power source.
2. Firmly hold the lamp head. Carefully insert
the bulb into the metal clips (D) at the top
of the head. Push the bulb (B) downward
into the socket (C). (See Fig. 6.)
3. Be sure the bulb is firmly seated in the
socket. (See Fig. 7.)
4. Replace grid diffuser.
VF02_MAN_Rev21.indd 9 8/19/15 1:43 PM