User Guide

7
Job#: 0.0637 Title: VC02 Manual Update
Date: 01/29/13 Version: Rev6
Bulb Replacement Instructions
Removal
1. Unplug lamp from power source and,
if necessary, allow time for the bulb to
cool.
2. Hold the metal lamp shade and turn
itcounterclockwise.(SeeFig.1.)
Carefully pull the shade over the bulb
and set the shade aside.
3. Hold the lamp and twist the bulb
counterclockwise, as you would a
conventional light bulb.
Installation
1. Unplug lamp from power source.
2. Hold the lamp and align the two pins
on the bottom of the bulb with the
corresponding openings in the bulb
base.(Eitherpinineitheropeningis
ne.SeeFig.2.)
Fig. 2
Fig. 1
CAUTION: Always unplug lamp before performing bulb
replacement or installation.
CAUTION:
VC02-MAN-Rev6.indd 7 1/30/13 12:40 PM