User manual

2: Setting Up the Edge Devices
32 Verint Video Solutions
 Unit RF Margin—The RF margin (in dB) used by the client or
slave.
 Master Rx Bit Rate—The reception data rate (in Mbps) of
the master. It corresponds to the transmission bit rate of
the client or slave. You can manually change this value.
 Master Rx Level—The average signal level (in dBm)
indicating the strength of the signal received by the master.
 Master RF Margin—The RF margin (in dB) used by the
master.
Once a client or slave device is operating properly, Verint Video
Solutions strongly recommends to change its configured bit
rate from the default value to the actual bit rate of the
connection. This way, the wireless communication will be more
stable in the presence of changing atmospheric conditions or
other RF interferers. If the quality of the RF link degrades
severely, the actual bit rate could be lower that the manually
configured one.
To change the transmission bit rate of a client or slave:
1. In the parameter tree of the master device, expand the
Network and the Wireless structures, then click Link
Status.
2. In the Clients/Slaves list, right-click the desired device,
then choose Force Transmission Bit Rate.