Instructions Owner manual

Veris Technologies

Pub. #OM 1CM02-1

If any old data files are present on the Instrument, pressing any key at the main title screen will bring

up the following screen:

Pressing 1 will proceed into managing the files on the Instrument and CF card. Pressing 2 will

continue to the main menu.

This is the File Management menu. Pressing 1 will copy all data files present on the Instrument to the

removable CF card.

Pressing 2 will bring up the following screen:

Selecting 1 will delete ALL data files from the Instrument. Verify that all data files are backed up to a

computer before proceeding.

Pressing 3 in the File Management menu will bring up the following screen:

Selecting 1 will delete ALL data files from the CF card. Verify that all data files are backed up to a

computer before proceeding.

If you choose to quit, the display will read:

To copy files from the CF card to a PC, turn off the instrument and remove the CF card from the

Instrument by pressing the black button located under the drive door. The card will spring free.

Use the included USB CF card reader to transfer files from the CF card to your computer. Before

transferring files for the first time, follow the manufacturer’s directions for installing any necessary

drivers for the USB reader.

Follow these steps to transfer files from the CF card to your computer:

1) Shut off your instrument. Always turn the instrument off before removing the CF card.

2) Remove the CF card from the instrument and insert it into the USB reader.

3) Connect the USB reader to your computer.

4) Transfer the data files from the CF card to your computer using File Manager.

5) Left mouse click on the green arrow in your computer’s system tray and again on the button

“Stop USB Mass Storage Device”.

6) Click “OK” on the window that appears. It is now safe to remove the card reader from your

computer and re-insert it in to your instrument.

**NOTE: The instrument WILL NOT function without the CF card inserted. If the

instrument is turned on without the CF card inserted, the display will only show black bars

on the first line. If this occurs, shut down the instrument, insert the CF card, and restart

the Instrument.

**NOTE: DO NOT leave the CF card and USB card reader connected to your computer when

shutting down or restarting your computer.