Install Instructions

Installation Guide
Accessories
Z206730-0B Page 1 of 2 ©2014 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [e-mail] 10141
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
TM
NOTICE
• This product is not intended for life or safety applications.
• Do not install this product in hazardous or classied locations.
• Read and understand the instructions before installing
this product.
• Turn off all power supplying equipment before working on it.
• The installer is responsible for conformance to all applicable codes.
No responsibility is assumed by Veris Industries for any consequences arising out of the
use of this material.
Product Overview
The AG02 nitrogen dioxide (NO
2
) sensing element is designed to work with the Veris GWN Series gas platform unit
to provide accurate monitoring of NO
2
levels. Common sources of NO
2
include exhaust from diesel engines and
diesel powered generators. The sensor is calibrated at the factory, so no field calibration is needed. The AG02 is
warranted to meet accuracy specifications for two years from the date of manufacture.
AG02
Nitrogen Dioxide Sensing Element
Specifications
Sensor Type
Electrochemical
Measurement Range
0-15 ppm
Accuracy
±5% of range at 25°C
Resolution
0.1 ppm
Sensor Warranty
2 years from manufacture date
Low Level Setpoint
1 ppm (fixed)
High Level Setpoint
3 ppm (fixed)
Operating Temperature Range
-20° to 50°C (-4° to 122°F)
Operating Humidity Range
0-90% RH noncondensing
The AGxx sensors work only with Veris GWN Series gas platform devices.