Manualshelf

Install Instructions

ManualsBrandsVeris ManualsHVAC ControlsGWN Series Gas Sensor with Relay Field-Selectable Output (Black)
1234
Z206728-0D Page 1 of 4 ©2016 Veris Industries USA 800.354.8556 or +1.503.598.4564 / support@veris.com 0916
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
TM
Installation Guide
Air Quality
Product Overview
The GWN Series wall mounted gas platform converts gas sensor readings into a signal that is compatible with
building control sensors. To operate, the GWN must be used with a Veris AG Series gas sensor (sold separately). The
GWN board has a connector for mounting a single AG sensor, and this sensor can be replaced at any time without
removing the GWN from its installed location. Simply remove the GWN cover, replace the AG sensor inside, and
reinstall the cover (see the installation guide for the AG sensor for more information). The GWN oers multiple
output options: 0 to 5 Vdc and 0 to 10 Vdc with relay, 4 to 20 mA with relay, or relay only. To maintain accuracy,
keep all vents free of dust and debris. The GWN is warranted for a period of ve years.
GWN Series
Wall Mounted Platform for Gas Sensors
Specications
Input Power 15 to 30 Vdc/24 Vac ±20%, Class 2, 50/60Hz, max. 60 mA
Relay Contact Ratings 1 A/30 Vdc, Normally Open
Operating Temperature Range -20 to 50 °C (-4 to 122 °F)
Operating Humidity Range 0 to 90% RH non-condensing
Terminal Block Wire Size 30 to 12 AWG
Terminal Block Torque 0.5 to 0.6 N-m (0.37 to 0.44 ft-lb)
Protection Class (self-evaluated) IP20
Agency Approvals Intertek ETL Listed to UL 61010-1
The GWN operates only when an AG Series gas sensor is installed (sold separately). Accuracy, sensitivity, setpoints, and
measurement range are dependant on the AG Series sensor connected to the GWN platform. See the AGxx sensor
installation guide for details.
Product Identication
GWN
V = 0 to 5 Vdc/0-10 V (selectable)
M = 4 to 20 mA
1 = Relay only
Blank = Black
W = White
Output
Housing
Color
X X
Dimensions
0.6”
(15 mm)
4.5”
(113 mm)
2.75”
(70 mm)
1.2”
(30 mm)
1.1”
(27 mm)
1.7”
(42 mm)
3.25”
(83 mm)
Example:
GWNMXXW

Summary of content (4 pages)