Product Overview

Wiring 22 AWG; 2-wire: RTD/Thermistor
Probe Stainless steel
Operating Temp
Probe: -25° to 105 °C (-13 to 221 °F)
Wiring side: Up to 75 °C (167 °F)
WARRANTY
Limited Warranty 5 years
TJ
The TJ Series temperature sensors are highly accurate and cost effective,
with trouble-free installation. The sensor is encased in a sturdy
corrosion-resistant stainless steel probe. A variety of RTD/thermistor
sensor and probe length options are available for maximum versatility
in applications.
Increased cable length aects the readings of lower resistance RTDs (100R platinum, RTD).
* Room temperature oset documented on each unit.
APPLICATIONS
• VAV reheat boxes
• Dual duct boxes
• Fan coils
• Prove that hot water valve
or electric heat is
functioning properly
• Check individual reheating
stages
• Check for hot water valve leaks
• Determine if damper actuators
are functioning on dual
duct boxes
Easy installation
Stainless steel duct probe with
mounting ange
Two wires
2-wire installation (optional quick
disconnect)…installs in minutes
VAV systems
Installation-ready for VAV systems
and plenum areas
…saves money
on job commissioning and
warranty service
Plenum rated
Plenum rated cable standard
Application
flexibility
4” or 8” (102 mm or 204 mm) duct
probes
SPECIFICATIONS
800.354.8556
|
+1 503.598.4564
|
[e-mail]
|
[e-mail]
|
veris.com
Temperature Monitoring | VAV Discharge Temperature Sensors
TJ SERIES
VAV Discharge Air Sensor for
Reheat Applications
HQ0001880.M 0321