Installation Guide

Step 5: Mount the device
Once you have activated and tested the device, you can mount it to the asset.
To mount the device:
1. Hold the device in the mounting position.
2. Mark the positions of the four mounting holes.
3. Drill holes in the positions you’ve just marked.
4. Secure the device to the asset using the included screws or bolts.
Do not use rivets or countersink screws. Do not over-torque. Over-torquing or using the wrong
mounting hardware can cause the plastic surrounding the mounting hole to crack.
Step 6: Rename the asset in Reveal
The asset is listed in Reveal with the serial number as the asset name. We recommend that
you rename the asset so that it’s easier to identify on Live Map and in your reports.
To rename the asset:
1. In Reveal, go to Admin > Asset List.
2. In the Search field, type the device serial number and press Enter.
3. Choose the Edit icon next to the asset.
4. Enter a unique asset name and asset number.