Installation Guide

Status LEDs
The device runs a status test for Battery, Network, and GPS whenever the status button is pressed.
Status test results are displayed on the status LEDs as described below. The LEDs stay lit only for a brief
duration. However, the test can be repeated by pressing the status button again, which is useful for
determining the best place on the asset to mount the device.
I C O N
N A M E
S T A T U S
Battery
• 1 flash = 10-25% full
• 2 flashes = 25 - 50% full
• 3 flashes = 50 - 75% full
• 4 flashes = 75 - 100% full
Network
• Slow flash: device is seeking network.
• Solid: network connection acquired
• Fast flash: network connection failed.
GPS
• Slow flash: device is seeking GPS.
• Solid: GPS location acquired.
• Fast flash: GPS location failed.