User's Manual

For more information, visit www.in-drive.com/sf

Why did I receive an Uninstalled Device Notication Email?

Either your In-Drive Communicator is not plugged in or it may be improperly plugged into the OBD-II Port.

Review the instructions in the Quick Start Guide to ensure the device is plugged in correctly. You may have

also received an email if your device has been unplugged or your vehicle has been in an area with poor cellular

coverage for more than 10 days. If your device is plugged in and you received the notication, unplug the

device, and plug it back in.

I have paired my Bluetooth

mobile phone with my In-Drive Visor Clip. Why is it not working?

After pairing your mobile phone with the Visor Clip, your phone must remain in the car to use the hands-free

talking feature, with the device plugged in correctly. You should attach the clip to the driver side of the vehicle.

I plugged in the In-Drive Communicator and my car alarm has been going off. What should I do?

The device may interfere with some car alarm systems, whether installed by the dealer or a third-party. If you’ve

encountered this problem, please contact the In-Drive Support Center at 888.270.0267.

Why won’t my In-Drive Visor Clip charge?

You may need to rst turn the Bluetooth switch on and then off again to bring the Visor Clip out of hibernation.

Then follow the instructions in the Quick Start Guide to charge your Visor Clip.

NOTE: If you experience any problems with your vehicle or your vehicle’s performance that

you suspect may be related to the In-Drive device, remove the In-Drive Communicator and call

888.270.0267 immediately for technical assistance.

Troubleshooting Tips