User guide

MP Modem Operation
Rev 1.5 Jul.08 35
Reset the MP modem
TheresetbuttonfortheMPmodemisonthetopofthe
housing.
ToresettheMPmodem,pressthe
buttonuntilallfourindicatorlights
illuminate.(Donotusesharpimple
‐
mentsthatmightpuncturethe
rubber.)
ResettingtheMPmodemisequiv‐
alenttoturningtheMPmodemoff
andon.Thisterminatesanydata
connectionandcausestheMP
modemtoperformaself‐test.(Stored
settingsarenotlost.)
Figure 4-2: The MP modem reset button.
3G Watcher software
3GWatcheristheprogramusedtomanageand monitorthe
MPmodem.Forinformationaboutinstalling3GWatcher,see
“Step5—Installthesoftware”onpage31.
3GWatcherallowsyouto:
Note: Depending on the
operating mode, it may not be
necessary to run 3G Watcher to
use the MP modem, but it does
provide useful status information.
• Determinesignalstrength,roamingstatus,andother
networkconnectionparameters.
• MonitorthestatusoftheMPmodemandnetwork 
services.
• Initiatedataconnections.
• Set3GWatchernotificationoptions.
• ConfiguretheI/Oports.
• ViewGPSinformation.
3G Watcher Help
3GWatcherhasawell‐indexedanddetailedonlinehelp
system.
Toaccesshelpin3GWatcher,selectHelp > Help Topicsorpress
the
<F1>key.