User's Manual

Power off the gNB and restart it. Make sure the mac address is correct in Linux, otherwise,
repeat step 8.
root@localhost:~#ifconfig –a
3.3 Upgrad system application and run validation
tests
3.3.1 TinyLinuxlogin
Restart gNB, and input the following command under u-boot command line.
=>setenv boot_targets "usb0 mmc0 scsi0"
=>setenv bootcmd_mmc0 "devnum=0; run mmc_boot"
=>boot
Input user name: root
NXP LSDK tiny 2004 (based on Yocto)
TinyLinux login:root