User guide

ADDING OR CHANGING THE PICTURE ID
To select a picture or graphic to assign to a Caller ID:
1. From standby mode, press the OK Key [OK] to unlock the
keypad, then press the Right Soft Key [Contacts], then press
the Directional Key up or down to highlight an entry.
2. Press the Left Soft Key
[Edit].
3. Press the Directional Key
up or down to highlight ”Picture”,
then press the Left Soft Key
[Set].
4. Press the Directional Key
up, down, left or right to select a
picture, then press the OK Key [OK].
5. When completed, press the OK Key
[SAVE].
ADDING OR CHANGING AN EMAIL ADDRESS
To enter or add an Email address to a Contact entry:
1. From standby mode, press the OK Key [OK] to unlock the
keypad, then press the Right Soft Key
[Contacts], then press
the Directional Key up or down to highlight an entry.
2. Press the Left Soft Key
[Edit].
3. Press the Directional Key
up or down to highlight ”E-mail 1”
or ”E-mail 2”.
4. Slide out the QWERTY keyboard, and then enter an Email address,
then press the OK Key
[SAVE] to save.
ADDING A SPEED DIAL ENTRY
To add an entry to Speed Dial:
1. From standby mode, press the OK Key [OK] to unlock the
keypad, then press the Right Soft Key
[Contacts], then press
the Directional Key up or down to highlight an entry.
2. Press the Left Soft Key
[Edit].
3. Press the Directional Key
up or down to highlight the phone
number you want to add to Speed Dial, then press the Right Soft
Key [Options].
4. Slide out the QWERTY keyboard, and then select ”1. Set Speed
Dial”, then press the OK Key
[OK].
5. Press the Directional Key
up or down to select a Speed Dial
location, then press the OK Key [SET].
30 Chapter 3 − Memory Function
Memory FunctionMemory Function
6. Press the Directional Key up or down to select ”Yes ” to save,
then press the OK Key [OK].
7. Press the OK Key
[SAVE] to save.
EDITING CONTACTS ENTRIES
ADDING A PHONE NUMBER FROM THE STANDBY MODE
1. From standby mode slide out the QWERTY keyboard, and then
enter the phone number you want to save (up to 48 digits).
2. Press the Left Soft Key
[Save].
3. Press the Directional Key
up or down to highlight
”Update Existing”, then press the OK Key [OK].
4. Press the Directional Key
up or down to highlight the existing
Contact entry, then press the OK Key [OK].
5. Press the Directional Key
up or down to highlight the phone
number type, then press the OK Key [OK].
Mobile 1/Mobile 2/Home/Work/Fax
6. If a phone number is already assigned to the item you selected,
press the Directional Key
up or down to select ”Yes ” or ”No”,
then press the OK Key [OK]. If nothing is currently assigned to
the phone number item, press the OK Key
[SAVE].
7. “ CONTACT SAVED” displays, then the phone number reappears on
the screen. Press the End Key
to exit, or press the Send Key
to call the number.
ADDING A PHONE NUMBER FROM THE CONTACT LIST
SCREEN
1. From standby mode, press the OK Key
[OK] to unlock the
keypad, then press the Right Soft Key [Contacts]. Your
Contacts display alphabetically.
2. Press the Directional Key
up or down to highlight the Contact
entry you want to edit, then press the Left Soft Key [Edit].
3. Press the Directional Key
up or down to highlight the phone
number field you want to add, slide out the QWERTY keyboard,
and then enter the number, then press the OK Key
[SAVE] to
save. A confirmation message appears.
Memory Function − Chapter 3 31
Memory FunctionMemory Function
080625_TXT8010_ELVIS_M_EN_REV00.indd 30-31080625_TXT8010_ELVIS_M_EN_REV00.indd 30-31 2008.6.25 9:34:46 PM2008.6.25 9:34:46 PM