User guide

DEFAULT NUMBERS
The phone number saved when a Contact is created is the Default
Number. If more than one number is saved in a Contact entry, another
number can be set as the Default Number.
The Default Number cannot be deleted. The entire Contact entry can be deleted or
another number can be assigned as the Default Number allowing you to delete the
original number and keep the Contact entry.
CHANGING THE DEFAULT NUMBER
1. From standby mode, press the OK Key
[OK] to unlock the
keypad, then press the Right Soft Key [Contacts]. Your
Contacts display alphabetically.
2. Press the Directional Key
up or down to highlight the Contact
entry you want to edit, then press the Left Soft Key [Edit].
3. Press the Directional Key
up or down to highlight the phone
number you want to assign as the Default Number, then press the
Right Soft Key [Options].
4. Press the Directional Key
up or down to highlight
”2. Set As Default”, then press the OK Key [OK].
5. Press the Directional Key
up or down to select ”Yes ”.
6. Press the OK Key
[OK]. A confirmation message appears.
7. Press the OK Key
[SAVE] to save.
EDITING STORED PHONE NUMBERS
1. From standby mode, press the OK Key
[OK] to unlock the
keypad, then press the Right Soft Key [Contacts]. Your
Contacts display alphabetically.
2. Press the Directional Key
up or down to highlight the Contact
entry you want to edit, then press the Left Soft Key [Edit].
3. Press the Directional Key
up or down to highlight the phone
number.
4. Slide out the QWERTY keyboard, and then edit the phone number
as necessary, then press the OK Key
[SAVE].
EDITING STORED NAMES
1. From standby mode, press the OK Key [OK] to unlock the
keypad, then press the Right Soft Key [Contacts]. Your
Contacts display alphabetically.
2. Press the Directional Key
up or down to highlight the Contact
entry you want to edit, then press the Left Soft Key [Edit].
32 Chapter 3 − Memory Function
Memory FunctionMemory Function
3. Slide out the QWERTY keyboard, and then edit the name as
necessary, then press the OK Key [SAVE].
DELETING
DELETING A PHONE NUMBER FROM A CONTACT
1. From standby mode, press the OK Key
[OK] to unlock the
keypad, then press the Right Soft Key [Contacts].
2. Press the Directional Key
up or down to highlight the Contact
entry, then press the Left Soft Key [Edit].
3. Press the Directional Key
up or down to highlight the phone
number to be deleted.
4. Press and hold the Clear Key
to delete the number.
5. Press the OK Key
[SAVE]. A confirmation message appears.
DELETING A CONTACT ENTRY
1. From standby mode, press the OK Key
[OK] to unlock the
keypad, then press the Right Soft Key [Contacts].
2. Press the Directional Key
up or down to highlight the Contact
entry to be deleted.
3. Press the Right Soft Key
[Options].
4. Slide out the QWERTY keyboard, and then press ”2. Erase”.
5. Press the Directional Key
up or down to select ”Yes ”.
6. Press the OK Key
[OK]. A confirmation message appears.
DELETING A SPEED DIAL
1. From standby mode, press the OK Key
[OK] to unlock the
keypad, then press the OK Key
[MENU].
2. Press the Directional Key
up or down to highlight
”4. Speed Dials”, then press the OK Key [OK].
3. Press the Directional Key
up or down to highlight the
Speed Dial number.
4. Press the Right Soft Key
[Remove].
5. Press the Directional Key
up or down to select ”Yes ”.
6. Press the OK Key
[OK]. A confirmation message appears.
Memory Function − Chapter 3 33
Memory FunctionMemory Function
080625_TXT8010_ELVIS_M_EN_REV00.indd 32-33080625_TXT8010_ELVIS_M_EN_REV00.indd 32-33 2008.6.25 9:34:48 PM2008.6.25 9:34:48 PM