User guide

END CALL OPTIONS
To determine how to handle an end call:
1. From standby mode, press the OK Key [OK] to unlock the keypad,
then press the OK Key [MENU], the Directional Key right
twice for SETTINGS & TOOLS, then slide out the QWERTY keyboard
and press 7. Call Settings, 2. End Call Options.
2. Press the Directional Key
up or down to select “Slide Close”, then
press the OK Key
[MARK].
3. Press the Left Soft Key
[Done].
To end a call, press the END Key .
AUTO RETRY
To set the length of time the phone waits before automatically redialing a number
when the attempted call fails:
1. From standby mode, press the OK Key [OK] to unlock the keypad,
then press the OK Key [MENU], the Directional Key right
twice for SETTINGS & TOOLS, then slide out the QWERTY keyboard
and press 7. Call Settings, 3. Auto Retry.
2. Press the Directional Key
up or down to select the following
settings, then press the OK Key
[OK].
10 Seconds/30 Seconds/60 Seconds/Off.
TTY MODE
You can attach a TTY device to your phone enabling you to communicate with
parties also using a TTY device. A phone with TTY support is able to translate typed
characters to voice. Voice can also be translated into characters and then displayed
on the TTY.
1. From standby mode, press the OK Key [OK] to unlock the keypad,
then press the OK Key [MENU], the Directional Key right
twice for SETTINGS & TOOLS, then slide out the QWERTY keyboard
and press 7. Call Settings, 4. TTY Mode.
2. Press the Directional Key
up or down to select one of the
following settings, then press the OK Key [OK].
TTY Full/TTY + Talk/TTY + Hear/TTY Off.
68 Chapter 4 − Menu Function
SettingsSettings
ONE TOUCH DIAL
To initiate a speed dial call by holding down the speed dial digit:
1. From standby mode, press the OK Key [OK] to unlock the keypad,
then press the OK Key [MENU], the Directional Key right
twice for SETTINGS & TOOLS, then slide out the QWERTY keyboard
and press 7. Call Settings, 5. One Touch Dial.
2. Press the Directional Key
up or down to select “On/Off”, then
press the OK Key
[OK].
If One Touch Dial is disabled, Speed Dial numbers designated in your Contacts will
not function.
VOICE PRIVACY
To turn the voice privacy feature On or Off:
1. From standby mode, press the OK Key [OK] to unlock the keypad,
then press the OK Key [MENU], the Directional Key right
twice for SETTINGS & TOOLS, then slide out the QWERTY keyboard
and press 7. Call Settings, 6. Voice Privacy.
2. Press the Directional Key
up or down to select “On/Off”, then
press the OK Key [OK].
DTMF TONES
To set the Key Tone length and touch tone playback speed:
1. From standby mode, press the OK Key [OK] to unlock the keypad,
then press the OK Key [MENU], the Directional Key right
twice for SETTINGS & TOOLS, then slide out the QWERTY keyboard
and press 7. Call Settings, 7. DTMF Tones.
2. Press the Directional Key
up or down to select one of the
following settings, then press the OK Key
[OK].
• Normal: Sends out a tone for a fixed period of time even if you continue to press the key.
• Long: Sends out a continuous tone for the duration the key is pressed and held.
MEMORY
SAVE OPTIONS
To select whether to save to Phone Memory or to Card Memory when saving a file:
1. From standby mode, press the OK Key [OK] to unlock the keypad,
then press the OK Key [MENU], the Directional Key right
twice for SETTINGS & TOOLS, then slide out the QWERTY keyboard
and press 8. Memory, 1. Save Options.
Menu Function − Chapter 4 69
SettingsSettings
080625_TXT8010_ELVIS_M_EN_REV00.indd 68-69080625_TXT8010_ELVIS_M_EN_REV00.indd 68-69 2008.6.25 9:35:13 PM2008.6.25 9:35:13 PM