User guide
5. Repeat steps 1-4. When you are finished with a full session, you
will reach a screen that reads “Adaptation Complete”.
PROMPTS
Allows you to select the voice command system characteristics.
1. From standby mode, press the OK Key [OK] to unlock the
keypad, then press the OK Key [MENU], the Directional Key
right twice for SETTINGS & TOOLS, then slide out the QWERTY
keyboard and press 2. Tools, 1. Voice Commands.
2. Press the Right Soft Key
[Settings], “5. Prompts”.
3. Select “1. Mode” or “2. Audio playback” by pressing the Directional
Key
up or down, then press the OK Key [OK].
•
Mode: Select the voice command system mode from the following:
- Prompts: For handset to read out voice command prompts.
- Readout: For handset to read out prompts, dialing digits and menus.
- Tones Only: For handset to prompt you with a tone only.
•
Audio playback: Allows audio playback to play through the speakerphone or
through the earpiece. Select “Automatic”, “ Speakerphone” or
“Earpiece” with the Directional Key up or down.
CALL ALERT
Provides audible readout of the phone number and/or name (if in your contact list) of
an incoming call.
1. From standby mode, press the OK Key [OK] to unlock the
keypad, then press the OK Key [MENU], the Directional Key
right twice for SETTINGS & TOOLS, then slide out the QWERTY
keyboard and press 2. Tools, 1. Voice Commands.
2. Press the Right Soft Key
[Settings], “6. Call Alert”.
3. Select “Ring Only”, “ Caller ID + Ring” or “Name Repeat” by pressing
the Directional Key
up or down, then press the OK Key
[OK].
ABOUT
1. From standby mode, press the OK Key [OK] to unlock the
keypad, then press the OK Key [MENU], the Directional Key
right twice for SETTINGS & TOOLS, then slide out the QWERTY
keyboard and press 2. Tools, 1. Voice Commands.
2. Press the Right Soft Key
[Settings], “7. About”.
3. The VoiceSignal version appears.
4. To return to the previous screen, then press the OK Key
[OK].
78
Chapter 4 − Menu Function
Voice ToolsVoice Tools
CALCULATOR
The Calculator allows you to perform simple mathematical calculations.
To access the calculator:
1. From standby mode, press the OK Key [OK] to unlock the keypad,
then press the OK Key [MENU], the Directional Key right
twice for SETTINGS & TOOLS, then slide out the QWERTY keyboard
and press 2. Tools, 2. Calculator.
2. Follow the instructions below to calculate 8×6÷4-2.5=9.5
•
Input 8 and then press the Directional Key right.
•
Input 6 and then press the Directional Key left.
•
Input 4 and then press the Directional Key down.
•
Input 2 and then press the to input (.).
•
Press 5.
•
Then press the OK Key and you will see the answer (9.5).
3. To reset, press the Left Soft Key [Clear].
•
Directional Key right : X, Directional Key down : -,
Directional Key left : ÷, Directional Key up : +, * Key : .,
Left Soft Key : Clear, OK Key : =.
•
To change the displayed number from positive (+) to negative (-) and vice versa,
press # Key .
•
Press the Right Soft Key [Operator] to use parenthesis “1. (”, “ 2. )” and
“3. Exponent”.
CALENDAR
The Calendar tool provides easy and convenient access to your schedule.
Simply store your appointments and your phone will alert you to them.
1. From standby mode, press the OK Key [OK] to unlock the keypad,
then press the OK Key [MENU], the Directional Key right
twice for SETTINGS & TOOLS, then slide out the QWERTY keyboard
and press 2. Tools, 3. Calendar.
Shortcut: In idle mode, press the Directional Key down to access Calendar.
2. Press the Directional Key up, down, left or right to highlight the
scheduled day.
3. Press the Left Soft Key
[Add].
4. The Appointment field is highlighted. Enter the name of the event.
Press the Directional Key
down to set the other fields for the
event:
APPOINTMENT
Use the keypad to enter an appointment in your schedule.
Menu Function − Chapter 4
79
ToolsTools
080625_TXT8010_ELVIS_M_EN_REV00.indd 78-79080625_TXT8010_ELVIS_M_EN_REV00.indd 78-79 2008.6.25 9:35:19 PM2008.6.25 9:35:19 PM