User guide

ALARM CLOCK
The Alarm Clock tool allows you to set up to three alarms. When you set an
alarm, the current time is displayed at the top of the screen. When the alarm
goes off, Alarm 1 (or 2 or 3, as applicable) will be displayed on the LCD screen
and the alarm will sound.
1. From standby mode, press the OK Key [OK] to unlock the keypad,
then press the OK Key [MENU], the Directional Key right
twice for SETTINGS & TOOLS, then slide out the QWERTY keyboard
and press 2. Tools, 4. Alarm Clock.
2. Press the Directional Key
up or down to highlight an Alarm
(1, 2, or 3), then press the OK Key [OK].
3. The setting field will be highlighted. Press the Directional Key
down to select alarm options.
ALARM
Press the Directional Key
left or right to select “On/Off”.
TIME
Use the keypad to set a time for the alarm and press the Left Soft Key
for “am/pm”.
FREQUENCY
Press the Directional Key
left or right to select a setting for the
alarm (Once, Daily, Mon - Fri, Weekends).
RINGER
Press the Left Soft Key
[Set] to “1. Get New Ringtones” or select
the alert tone you wish to set. Press the Left Soft Key
[Play]
to preview a ringtone. Press the OK Key [OK] to make your
selection.
4. To save an alarm setting, press the OK Key
[SAVE].
TURN ON/OFF THE ALARM SETTING
1. From standby mode, press the OK Key [OK] to unlock the keypad,
then press the OK Key [MENU], the Directional Key right
twice for SETTINGS & TOOLS, then slide out the QWERTY keyboard
and press 2. Tools, 4. Alarm Clock.
2. Press the Directional Key
up or down to highlight an Alarm
(1, 2, or 3), then press the Right Soft Key [Options].
3. Select “Turn On/Turn Off” then press the OK Key
[OK].
82 Chapter 4 − Menu Function
ToolsTools
RESET THE ALARM SETTING
1. From standby mode, press the OK Key [OK] to unlock the keypad,
then press the OK Key [MENU], the Directional Key right
twice for SETTINGS & TOOLS, then slide out the QWERTY keyboard
and press 2. Tools, 4. Alarm Clock.
2. Press the Directional Key
up or down to highlight an Alarm
(1, 2, or 3), then press the Right Soft Key [Options].
3. Select “Reset Alarm”, then press the Directional Key
up or down
to select “Yes”, then press the OK Key [OK].
RESET ALL ALARM SETTINGS
1. From standby mode, press the OK Key [OK] to unlock the keypad,
then press the OK Key [MENU], the Directional Key right
twice for SETTINGS & TOOLS, then slide out the QWERTY keyboard
and press 2. Tools, 4. Alarm Clock.
2. Press the Directional Key
up or down to highlight an Alarm
(1, 2, or 3), then press the Right Soft Key [Options].
3. Select “Reset All”, then press the Directional Key
up or down
to select “Yes”, and then press the OK Key [OK].
WORLD CLOCK
To display the time and date in pre-programmed cities:
1. From standby mode, press the OK Key [OK] to unlock the keypad,
then press the OK Key [MENU], the Directional Key right
twice for SETTINGS & TOOLS, then slide out the QWERTY keyboard
and press 2. Tools, 5. World Clock.
2. Press the Left Soft Key
[Cities] to access the CITIES LIST.
Press the Directional Key
up or down to select the city, then
press the OK Key
[OK]. Or, press the Directional Key up,
down, left, or right to select your city using the world map.
3. The world map appears with the city, its date, and time.
DST DAYLIGHT SAVING TIME SETTING
1. Press the OK Key [OK] to unlock the keypad, then press the Right
Soft Key [DST] to set the DST options. Press the Directional Key
left or right to select City and then press the Directional Key
down.
2. Press the Directional Key
left or right to turn DST (Daylight
Savings Time) “On/Off”. Press the Directional Key
down.
Menu Function − Chapter 4 83
ToolsTools
080625_TXT8010_ELVIS_M_EN_REV00.indd 82-83080625_TXT8010_ELVIS_M_EN_REV00.indd 82-83 2008.6.25 9:35:22 PM2008.6.25 9:35:22 PM