User guide

3. Under “Start Date”, use the keypad to change or enter the start date
and then press the Directional Key
down.
4. Under “Start Time”, use the keypad to set a start time and press the
Left Soft Key
for “am/pm” and then press the Directional Key
down.
5. Under “End Date”, use the keypad to change or enter the end date
and then press the Directional Key
down.
6. Under “End Time”, use the keypad to set a end time and press the Left
Soft Key
for “am/pm”.
7. To save a DST setting, press the OK Key
[SAVE].
NOTEPAD
Your phone includes an internal notepad that can be used to compose and
store reminders and notes. To create a note:
1. From standby mode, press the OK Key [OK] to unlock the keypad,
then press the OK Key [MENU], the Directional Key right
twice for SETTINGS & TOOLS, then slide out the QWERTY keyboard
and press 2. Tools, 6. Notepad.
2. Press the Left Soft Key
[New] to write a new note. When you are
done, press the OK Key
[SAVE].
VIEW SAVED MEMO
To view a saved memo:
1. From standby mode, press the OK Key [OK] to unlock the keypad,
then press the OK Key [MENU], the Directional Key right
twice for SETTINGS & TOOLS, then slide out the QWERTY keyboard
and press 2. Tools, 6. Notepad.
2. Press the OK Key
[VIEW] to view a selected Note.
ERASE SAVED MEMO
To erase a saved memo:
1. From standby mode, press the OK Key [OK] to unlock the keypad,
then press the OK Key [MENU], the Directional Key right
twice for SETTINGS & TOOLS, then slide out the QWERTY keyboard
and press 2. Tools, 6. Notepad.
2. Press the Right Soft Key
[Options], then select “Erase.”
3. Press the OK Key
[OK] to select “Yes .”
84 Chapter 4 − Menu Function
ToolsTools
ERASE ALL SAVED MEMOS
To erase all saved memos:
1. From standby mode, press the OK Key [OK] to unlock the keypad,
then press the OK Key [MENU], the Directional Key right
twice for SETTINGS & TOOLS, then slide out the QWERTY keyboard
and press 2. Tools, 6. Notepad.
2. Press the Right Soft Key
[Options], then select “Erase All.”
3. Press the OK Key
[OK] to select “Yes .”
STOP WATCH
Simultaneously times up to eight different events. To operate the stop watch:
1. From standby mode, press the OK Key [OK] to unlock the keypad,
then press the OK Key [MENU], the Directional Key right
twice for SETTINGS & TOOLS, then slide out the QWERTY keyboard
and press 2. Tools, 7. Stop Watch.
TO MEASURE A TIME PERIOD
1. To start the stop watch, press the OK Key [START].
2. To pause it, press the OK Key
[STOP].
3. To resume it, press the OK Key
[START].
4. To reset it, press the Right Soft Key
[Reset].
TO TIME UP TO EIGHT EVENTS AT ONCE:
1. To start the stop watch, press the OK Key [START].
2. To stop a time period and continue measuring another one,
press the Left Soft Key
[Lap].
3. To stop the second and continue measuring a third one, press the Left
Soft Key
[Lap].
4. To measure up to eight time periods, repeat the above steps.
5. To stop the stop watch, press the OK Key
[STOP].
6. To review the results, press the Left Soft Key
[View].
7. To return to the stop watch, press the OK Key
[OK].
8. To reset it, press the Right Soft Key
[Reset].
Menu Function − Chapter 4 85
ToolsTools
080625_TXT8010_ELVIS_M_EN_REV00.indd 84-85080625_TXT8010_ELVIS_M_EN_REV00.indd 84-85 2008.6.25 9:35:24 PM2008.6.25 9:35:24 PM