User guide

Messages Icon
New/Unread Message
Opened Download
Picture Message
Opened/Read Message Corrupt Message
Message Delivered
Pending Message
Send
Incomplete Delivery Unread MMS
Sent Message,
Delivery Failed
Read MMS
Message Locked Unread WAP Push
Text Message Draft Read WAP Push
Picture Message Draft
Multiple Message
Delivered
Unopened Message
Notification
Multiple Message
Failed
Messages Icon
Multiple Message
Incomplte
Multiple SMS/MMS
Ack
Multiple Message
Pending
INSTALL BATTERY
1. Remove the battery cover from the unit.
2. Slide the battery into the slot located at the
bottom of the unit and press until you hear
the “click”.
12 Chapter 1 − Before Using Blitz™
Before UsingBefore Using
REMOVE BATTERY
1. To remove the battery, push down on the top
of the battery while inserting your finger into
the slot and pulling up from the back of the
battery and slide it out.
2. Align the cover tabs with the slots at the top
of the device and slide the battery cover back
onto the unit.
If the battery is not correctly placed in the compartment, the handset will not turn on
and/or the battery may detach during use.
CHARGING YOUR BATTERY
1. To charge the phone, open the
Charging/Data Jack cover on the
Right Side of the phone, and
connect the charger adapter.
Plug the other end into a standard
outlet.
2. To remove the adapter connection,
squeeze the adapter’s side buttons
(1) and pull.
• When you charge the battery with the phone power off, you will see a charging status
screen. You cannot operate the phone until it is powered on.
• The battery is not fully charged at the time of purchase. Fully charge the battery
before use.
• It is more efficient to charge the battery with the handset powered off.
• Battery operating time gradually decreases over time.
• If the battery fails to perform normally, you may need to replace the battery.
Before Using Blitz™ − Chapter 1 13
Before UsingBefore Using
080625_TXT8010_ELVIS_M_EN_REV00.indd 12-13080625_TXT8010_ELVIS_M_EN_REV00.indd 12-13 2008.6.25 9:34:36 PM2008.6.25 9:34:36 PM