User guide

MAKING A CALL
1. Enter the phone number including the area code if needed and press
the SEND Key .
When you place or receive a call from phone numbers stored in your
Contact List, the name will be displayed.
ANSWERING CALLS
1. Press the SEND Key to answer the incoming call.
Depending on your phone’s settings, you may also answer incoming calls
by opening the phone or by pressing any key.
2. To ignore incoming calls, press the Right Soft Key [Ignore].
If Auto w/ Handsfree is set, a call is automatically answered after a preset
number of phone rings. For more details, see page 65.
ENDING A CALL
1. Press the END/PWR Key .
MISSED CALL NOTIFICATION
When an incoming call is not answered, the Missed Call icon appears on the
display.
DISPLAY THE MISSED CALL FROM THE NOTIFICATION
1. Select View Now and press the OK Key.
2. To dial the phone number, press the SEND Key
.
DISPLAY A MISSED CALL FROM IDLE MODE
1. Press the OK Key [MENU], select Recent Calls and press the OK Key.
2. Select Missed and press the OK Key.
3. Select the missed call and press the OK Key [OPEN].
4. To dial the phone number, press the SEND Key
.
WAIT/PAUSE
Pauses are used for automated systems (i.e., voice mail or calling cards). The
numbers entered after the pause will automatically be dialed after the pause.
It is useful for dialing into systems that require a code.
Wait (W)
The phone stops dialing until you press the SEND Key
to dial the next
number.
1. Enter the phone number.
2. Press the Right Soft Key
[Options].
22 Chapter 2 − Basic Operation
Basic OperationBasic Operation
3. Select and select Add Wait and press the OK Key.
4. Enter additional number(s).
5. Press the SEND Key
to dial.
2-Sec Pause (P)
The phone waits 2 seconds before sending the next digits automatically.
1. Enter the phone number.
2. Press the Right Soft Key
[Options].
3. Select Add 2-Sec Pause and press the OK Key.
4. Enter additional number(s) (pin number or credit card number).
5. Press the SEND Key
to dial.
MAKING CALLS OUTSIDE OF THE U.S.
The SIM Card is pre-installed in your phone.
MAKING A GSM INTERNATIONAL CALL TO CDMA FROM
ANOTHER COUNTRY
The United States is the default (reference country) on your phone. When Assisted
Dialing is set to ON (default), and the reference country is the United States, you can
place a call to the U.S. from another country by using an existing number from you
contact list (as if you were in the U.S.). In this scenario, there is no need to add your
current country’s exit code when you are dialing contacts with these settings.
1. Press and hold the International Dial Key to display the “+” symbol.
The “+” symbol automatically inserts the exit code for the country
from which you are calling.
2. Press
to insert the U.S. country code, then enter the area code
and number.
3. Press the SEND Key
.
MAKING A GSM INTERNATIONAL CALL FROM ANOTHER
COUNTRY GSM ONLY
1. Press and hold the International Dial Key to display the “+” symbol.
The “+” symbol automatically inserts the exit code for the country
from which you are calling.
2. Enter the country code of the person you are calling. Enter the area
code, without the leading zero, followed by the number of the person
you are calling.
3. Press the SEND Key
.
Basic Operation − Chapter 2 23
Basic OperationBasic Operation
090610_WP8990_Zephyer.indd 22-23090610_WP8990_Zephyer.indd 22-23 2009.6.11 2:57:27 PM2009.6.11 2:57:27 PM