User guide

3. Select New Picture Message and press the OK Key.
4. Select Picture and press the Left Soft Key
[My Pics]. Select the
picture to insert and press the OK Key to select.
5. Enter the remaining message information and press the OK Key
[SEND] or press the SEND Key
.
For detail on writing picture message, see page 95.
TO SEND A VOICE MESSAGE TO A GROUP
1. Press the OK Key [MENU], select Contacts and press the OK Key.
Select Groups then press the OK Key.
2. Select the group to send a voice message to and press the Right Soft
Key
[Options].
3. Select New Voice Message and press the OK Key.
4. Press the OK Key to being recording. Press the OK Key [STOP] to end
recording.
5. Enter any additional message information. To send, press the OK Key
[SEND] or press the SEND Key .
For detail on writing voice message, see page 96.
SPEED DIALS
Calls can be placed to numbers stored in speed dial by pressing & holding
the location number on the keypad. For a 2-digit location number, press
the first number then press and hold the second number. For a 3-digit
location number, press the first number and second numbers then press
and hold the third number.
1. Press the OK Key [MENU], select Contacts and press the OK Key.
Select Speed Dials then press the OK Key.
2. Select the Speed Dial position or enter the Speed Dial digit and
press the OK Key [SET].
3. Select the Contact and press the OK Key.
4. Select the number to assign the speed dial to and press the OK Key.
5. Select Yes and press the OK Key.
Unassigned appears if the location is available.
TO ERASE A SAVED SPEED DIAL
1. Press the OK Key [MENU], select Contacts and press the OK Key.
Select Speed Dials then press the OK Key.
38 Chapter 4 − Menu Function
ContactsContacts
2. Select the Speed Dial entry to erase.
3. Press the Right Soft Key
[Remove].
4. Select Yes and press the OK Key.
IN CASE OF EMERGENCY
Your phone has a special menu to organize your emergency contacts and
personal information.
TO ASSIGN EMERGENCY CONTACTS
Follow the procedures below to register a Contact to be contacted in case of emer-
gency or to register a medical record number or other personal information.
1. Press the OK Key [MENU], select Contacts and press the OK Key.
Select In Case of Emergency then press the OK Key.
2. Select Contact 1, Contact 2 or Contact 3 and press the OK Key
[ADD].
3. When selecting from ADD CONTACT, select From Contacts and
press the OK Key.
4. Select the desired contact entry and press the OK Key.
5. When adding a new contact, select New Contact and press the
OK Key.
6. Enter the contact information and press the OK Key [SAVE].
7. The contact name will be displayed in place of Contact 1,
Contact 2 or Contact 3.
TO REASSIGN EMERGENCY CONTACTS
1. Press the OK Key [MENU], select Contacts and press the OK Key.
Select In Case of Emergency then press the OK Key.
2. Select the contact to re-assign and press the Right Soft Key
[Options].
3. Select Re-assign and press the OK Key.
4. Select From Contacts and press the OK Key. Select a contact from
your Contact List. When adding a new contact, select New Contact
and press the OK Key.
5. Press the OK Key.
TO ERASE ASSIGNED EMERGENCY CONTACTS
1. Press the OK Key [MENU], select Contacts and press the OK Key.
Select In Case of Emergency then press the OK Key.
Menu Function − Chapter 4 39
ContactsContacts
090610_WP8990_Zephyer.indd 38-39090610_WP8990_Zephyer.indd 38-39 2009.6.11 2:57:40 PM2009.6.11 2:57:40 PM