User guide

DON’TS
• Don’t attempt to disassemble the battery. It is a sealed unit with no serviceable
parts.
• Don’t accidentally short circuit the battery by carrying it in your pocket or purse
with other metallic objects such as coins, clips and pens. This may critically
damage the battery.
• Don’t leave the battery in extremely hot or cold temperatures. Otherwise, it could
significantly reduce the capacity and lifetime of the battery.
• Don’t dispose of the battery by placing into a fire.
INSTALLING A SIM CARD
Your wireless device comes with a SIM card installed which along with a
Global Feature on your account, enables you to make calls and access email in
GSM Networks while traveling overseas. Should your SIM card be lost or
damaged, please follow these instructions for the installation of your new SIM.
• If your SIM card is lost or damaged within the United States, please dial *611 from
your device or 1.800.922.0204 to speak with a Customer Service Representative. From
outside of the United States dial [phone].
• Do not bend or scratch your SIM card. Avoid exposing your SIM card to static
electricity, water or dirt.
• The SIM Card is pre-installed in your phone.
1. Remove the battery cover from the back of the unit.
2. Push the bottom of battery upwards while inserting your finger into
the slot (1) and remove the battery.
3. Make sure the gold contacts of the SIM card are face down, then slide
the SIM card completely into the socket.
14 Chapter 1 − Before Using
Before UsingBefore Using
4. Slide the battery (1) into the slot by aligning the contacts located at
the top of the unit and press (2) until you hear it “click”.
5. Align the cover tabs with the slots on the back of the device and slide
the battery cover onto the unit.
REMOVING A SIM CARD
1. Remove the battery cover by pushing down on top of the battery
cover and sliding it off of the unit.
2. Push the bottom of battery upwards while inserting your finger into
the slot (1) and remove the battery.
3. Remove the SIM card from the SIM card slot.
4. Slide the battery (1) into the slot by aligning the contacts located at
the top of the unit and press (2) until you hear it “click”.
Before Using − Chapter 1 15
Before UsingBefore Using
090610_WP8990_Zephyer.indd 14-15090610_WP8990_Zephyer.indd 14-15 2009.6.11 2:57:21 PM2009.6.11 2:57:21 PM