Specifications

2. Wireless Network Configuration

For a wireless connection, the SSID (also known as the wireless network name), and the

wireless security settings must be the same for the router and wireless computers or wireless

adapters. NETGEAR strongly recommends that you use wireless security.

The router is preconfigured with WPA-PSK/WPA2-PSK mixed mode and uses a unique SSID

and passphrase. This information is printed on the label on the bottom of the router. Use this

information to set up your WiFi computer and devices.

This chapter addresses the following:

• Plan Your Wireless Network

• Manually Configure Your Wireless Settings

• Use Push 'N' Connect (WPS) to Configure Your Wireless Network

• SIM Card PIN Code

Note: Computers can connect wirelessly at a range of several hundred

feet. If you do not use wireless security, others outside your

immediate area can access your network.