User guide

10
LED States
Service Status LED
LED Color Status Description
No light
O, and the
Power Button
LED is also o
The device is powered o or otherwise is not getting
power.
No light
O; the Power
Button LED is
pulsing GREEN
The device is in low-power Standby mode. [See Power
Management
(page 59).] This means the device is charging
while connected to a computer, but the device is not
connected to the network.
GREEN
Solid
Slow blinking
Intermittent
blinking
The device is powered on but is not transmitting or
receiving data.
The device is on and searching for a network, and does not
have service.
The device is transmitting or receiving data. The blink rate
is proportional to the data speed.
Power Button LED
LED Color Status Description
No Light
O The device is powered o or otherwise is not getting power.
BLUE
Solid The device is powered on and roaming.
GREEN
Solid
Pulsing
The device is powered on and fully charged.
The device is in low-power Standby mode. [See Power
Management
(page 59).]
Red
Blinking The battery is critically low.
Amber
Solid
Pulsing
The battery is charging.
The device has an error. [See Troubleshooting
(page 60).]