User guide

 Plug the other end of the AC wall charger into the appropriate electrical outlet. Charge for at

least two and a half hours.

CAUTION! Use only batteries and chargers with your device that have been approved by

Verizon Wireless or Novatel Wireless. The failure to use approved batteries and chargers may

increase the risk that your device will overheat, catch ﬁre, or explode, resulting in serious bodily

injury, death, or property damage.

You are now ready to install the drivers and VZAccess Manager software. The rst time you use the

device, you must connect MiFi2200 to your computer with the microUSB cable (included).

Connect the Device to the Computer with the USB Cable

To connect the device to the computer

 Grip MiFi 2200 by its sides and gently connect the small end of the microUSB cable to the

microUSB port on the device.

The cable should t easily into the device. Do not force the cable into the device as this might

damage both the cable and the device.

 Connect the large end of the microUSB cable to your computer’s USB port.

The cable should t easily into the port. Do not force the cable into the port as this might

damage both the cable and the port.

NOTE If you have diﬃculty inserting the cable into your computer’s USB port, verify that you are inserting

the cable in the correct orientation and that you are using a Type A USB port.

The following occurs:

 The status icon appears in the system tray / notication area (Windows) or in the menu bar

(Mac).