User guide

27
Using the Device After Setup is Complete
MiFi2200 has two modes: Mobile Broadband with USB Cable mode or WiFi mode.
Mobile Broadband with USB Cable Mode
You can use MiFi2200 as a USB modem to connect your computer to the mobile broadband
network.
Connect the device to a computer
 Connect the device to your computer’s USB port with the included microUSB cable.
[See Connect the Device to the Computer with the USB Cable (page 18).]
 Turn on the device so both LEDs are lit and green. Although the device is powered on, it
does not automatically connect to the Internet.
 If sound eects are enabled, the computer might beep.
Open the software (Windows)
 Open the VZAccess Manager software. If the auto-launch feature is enabled it starts
automatically.
 An icon appears in the Windows notication area.
Open the software (Mac OS X)
 Double-click the VZAccess Manager icon in the Applications > VZAccess folder (unless Open at
Login is enabled).
 An icon appears in the menu bar.
Connect To and Disconnect From the Network
 Open the VZAccess Manager software.
The main window opens.
 To connect to the network, click Connect WWAN.
 To disconnect from the network, click Disconnect.