User guide
40
Updating the Current Profile
To update the current prole, follow these steps.
Keep the same prole in the Selected Prole pop-up menu.
Make changes to the prole settings.
Click Apply.
• If you change the Network Name (SSID), security method, or network key you will need to
re-connect with the WiFi manager on your computer.
• If you change other settings, your computer will re-connect automatically after MiFi2200
restarts.
Tip! Some WiFi clients become confused if the security is changed and the network name is not. If you
change security settings and do not get asked for the new network key when you try to reconnect,
delete the existing old network name from your Preferred Networks list on your wireless device.
Then you can reconnect.
IMPORTANT Changing the Network Name (SSID), security method, or network key (WiFi
passkey) ends all WiFi connections to MiFi 2200, including the current connection to MiFi
Settings. You must re-connect your computer to MiFi 2200 using the new profile’s WiFi settings.
Be sure to write down the new network key (WiFi passkey) before you finish changing the profile.
Updating a Profile Not Currently in Use
To update a prole not currently in use, follow these steps.
Change the Selected Prole pop-up menu to a dierent prole.
Wait a moment for the web page to update with the WiFi settings for the selected prole.
Change the settings.
NOTE The Temporary Hotspot profile cannot be changed directly. You must click Generate to generate a
new network name (SSID) and network key.
Click Update Prole to save the changes.
OR
Click Apply to update the prole and also make it the current prole.