User guide

• When removing the Personal Wearable Device from

the holder, be careful not to drop it.

• The Personal Wearable Device does not need to be

removed from the Wrist Strap for charging and it

should be attached in the accessory when docking.

Using the Lanyard accessory

1. Align the Personal Wearable Device's three

alignment grooves (located at the bottom) with

the bottom curved clip of the Lanyard holder and

push down firmly until you hear it click.

2. Connect the ends of the Lanyard. Wear the

accessory around your neck with the Personal

Wearable Device display facing away from you. If

you wear the Lanyard accessory with the

Personal Wearable Device display facing you, the

microphone will be covered and the call quality

will not be as good.

3. To release the Personal Wearable Device, gently

press back the top tab of the Lanyard holder.

Then lift the Personal Wearable Device up and

out to remove.