User's Guide

3
Paired: No/Bad
Signal
There is no signal from the 5G nodes.
Solid: Red
Regular usage
The Extender is working normally.
Off
Error
An error has occurred (ex. pairing/FW issue)
Blinking: Red
FW Update /
Reset
The Extender is ready to reboot after a FW
update.
Fast Blink: White
(Occurs during the 2 seconds prior to
reboot/power off)
1.3 Back Panel
1. Product label and QR code
Scan the QR code on this label with the Installer app to enable the receiver to establish a
connection with the Extender.
2. Mounting head
The mounting head fits into the installation slot on the mounting bracket.