VERIZON WIRELESS UM150 User’s Manual
CONTENTS CONTENTS 1. BEFORE USING UM150 ........................................................................ 1 1.1 About this User’s Manual ..................................................................................1 1.2 Product Overview .................................................................................................1 1.3 What’s Inside the Product Package ..............................................................1 1.4 Introduction to Verizon Wireless UM150 USB Modem .......
1. BEFORE USING UM150 1.1 About this User’s Manual You will find all the information you need to install and use the UM150 in this user’s manual. Before using the UM150, you must properly install the UM150 by closely following the installation instructions. 1.1.1 Instructions • Install the UM150 software before inserting the UM150 USB Device into your PC. The installation software is included in the product package. Insert the CD into your CD-ROM drive. Installation may take a few minutes.
1.5 Product Features - Power management: The UM150 utilizes power management and system overhead reduction functions provided by the USB interface for maximum power savings. - Antenna design: Efficient, innovative design optimizes data transfer rate and sensitivity to network signals. - Extension Y Cable connector: Simply insert the USB connector into the USB port of your computer to deliver a power boost, increased RF performance, and to solve clearance issues.
1.6 Product Handling 1) Do not put any adhesive label on the USB connector. It may leave a sticky residue that can cause problems inside the PC USB port. 2) The UM150 USB device should easily slide into the USB port. Do not force the UM150 into the USB port as it may cause damage to the modem and/or the port. 3) Keep the UM150 in a dry and clean place. (Storage temperature: -22°F to 149°F [- 30°C to 65°C]). Keep your device away from liquids, dust and excessive heat. 1.
2. INSTALLING UM150 2.1 Precautions 1) Do not insert the UM150 before installing the software on the computer. When you complete the software installation, the system will prompt you to insert the UM150 into the USB port. 2) Once the card has been inserted into the PC, do not remove it from your PC without first completing the unplugging/ejection process. 2.2 Recommended System Requirements To successfully install and use the UM150 USB device in your PC, the following system specifications are required.
2.3 Installing Software 2.3.1 Installation • If you install VZAccess Manager, it will install the USB Driver for the UM150. Follow the instructions from VZAccess Manager for installation. 2.3.2 Warnings • Make sure to complete the unplugging/ejection process before removing the UM150. If you remove the device improperly, the product may be damaged. (For further informatin on unplugging/ejection process, please refer to pages 8-9.
2.3.4 Using the Device The usage mode is set by sliding the window up or down before connecting to your PC. • To use the UM150 as both a modem and mass storage device, slide the window up and insert the UM150 into a PC USB port. To use it as a mass storage device only, slide the window down and insert the UM150 into a PC USB port. Note: Make sure to complete the unplugging/ejection process before removing the UM150. If you remove the device improperly, the product may be damaged.
2.3.5 Using the Device as a Mass Storage Unit • To use this device as a Mass storage unit, you must insert microSD Card (sold separately) in the slot located in the right down side of this device. How to Insert and Use the microSD Memory Card • The UM150 is equipped with removable, memory storage.
To Eject a microSD Card 1. Lift the bottom of the protective cover and turn it to show the microSD card inside the slot. 2. Gently push in the microSD card one time until it pops-up. 3. Carefully pull out the microSD card and keep the card in a safe place. Note: Do not eject microSD Memory Card from the UM150 while the device is connected to your computer. Unplugging or Ejecting the Device Make sure to complete the unplug/eject process on your computer before removing the UM150 from your PC.
• MACINTOSH When disconnecting a USB mass storage device from the computer, close all windows and quit all running applications that are stored on the device and drag the device’s icon (Mac OS9 – ; Mac OS X – ) ; Mac OS 10 – ) to dismount it onto trash (Mac OS9 – from the Desktop prior to unplugging the device from the USB port or Hub. Note: When removing the UM150, always grip the top and bottom of the modem and push/ pull carefully.
2.3.6 Using the USB Modem Extension Cable • The UM150 Modem package includes an extension USB Y-shaped cable. Although the cable is not required for use with your UM150 Modem, it offers increased performance for your UM150 Modem under certain operating conditions. Simply insert the USB connector into the USB port of your computing device to deliver power boost, increased RF performance, and to solve clearance issues.
3. REGULATORY AND SAFETY INFORMATION 3.1 Regulatory Notices UM150 complies with Parts 15, 22, and 24 of the FCC rules. It has been tested with the typical personal computer with a USB port. This USB device must not be co-located or operated in conjunction with any other antenna or transmitter. If you use this USB device in any other configuration, the FCC RF Exposure compliance limit can be exceeded. 3.
3) If this USB device does cause harmful interference with radio or television signals (determine this by turning the USB device off and on), attempt to correct the interference by trying one or more of the following: • Reorient or relocate the antenna. • Increase the separation between the USB device and receiver. • Connect the USB device into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.
3.4 Safety Precautions 1) Data transmission and reception cannot be guaranteed because of the nature of wireless communications. Data can be delayed, corrupted or lost during transmission.
4. GLOSSARY NationalAccess Analog Coverage An area where analog service is available. Analog phones usually indicate signal strength on an indicator in the phone's display when receiving an analog signal. Browser The software that allows you to view the Internet; contains navigator commands such as forward and back; examples include Netscape, Microsoft Explorer.
Package Minutes Package minutes are those minutes included in the cost of a monthly service plan. Once the packaged minutes have been exhausted, additional airtime charges apply. Please refer to Plans and Pricing for more information, details and offers in your area. Packet Switching Packet-switching messages are divided into packets or pieces before transmission over one or more routes and are reassembled at their destination.
5. SPECIFIC ABSORPTION RATES (SAR) Maximum: SAR 1.19 W/kg CDMA835 Body SAR 0.854 W/kg PCS1900 Body THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government.
SAFETY INFORMATION FOR RF EXPOSURE Body worn operation This device was tested in multiple notebook computer configurations with USB port configurations for typical near-body operations with the back of the USB Modem kept 20mm from the body.
U.S.A. U.S.FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT INFORMATION TO THE USER NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules.
