User's Guide
Table Of Contents
- Product Overview
- Verizon VRE3000
- Components and Indicators
- 2. Package Content
- Package Content
- 3. Getting Started
- Setting Up the Wi-Fi Extender
- Using the Admin Website
- Frequently Used Wi-Fi Extender Settings
- Extended Network Settings
- Managing the Extender’s IP Address
- Changing the Wi-Fi Extender’s Name
- Changing the Extended Network Names and Passwords
- Turning Off the SSID Broadcast
- Selecting a Network to Extend
- Connecting Devices to the Extended Network with WPS
- Finding the Best Location for your Wi-Fi Extender
- Controlling Access with Wireless MAC Authentication
- Administration Settings
- The About Screen
- The Help Screen
- Extended Network Settings
- Getting Started
- Wi-Fi Extender Settings
- 5. Troubleshooting
- Frequently Asked Questions
- Q1. How do I know if my computer or tablet is directly connected to the Wi-Fi Extender?
- Q2. What can I do if I cannot access the Extender’s Admin website?
- Q3. What can I do if I forgot my Admin password?
- Q4. How do I reset my Wi-Fi Extender to its factory default settings?
- Q5. Why can’t I connect my Wi-Fi Extender to my router using WPS?
- Q6. I’m connected to the extended network. Why don’t I have an internet connection?
- Q7. How do I know if my Wi-Fi Extender is connected to the Wi-Fi Router?
- Q8. Can the Wi-Fi Extender’s Network Names (SSIDs) be the same as that of my existing Wi-Fi Router?
- Product Specifications
- Regulatory Information
- Frequently Asked Questions
- Troubleshooting
- Product Spec. and Regulatory Information
1 Product Overview
4
1. Wi-Fi link indicator: Indicates 5 GHz connection to network router.
2. Power indicator: Shows if the Extender is on or off.
3. WPS indicator: Shows when Wi-Fi Protected Setup (WPS) is active.
4. WPS button: Use this button to connect your Wi-Fi Extender to your WPS-enabled Wi-Fi router to
extend the network. After setup, you can also use the WPS button to connect WPS-
enabled Wi-Fi devices to the extended network.
5. Reset button: Press this button to reset the Wi-Fi Extender to factory default settings:
Press and hold for at least 10 seconds until the Power indicator turns off. The
Wi-Fi Extender will return to its default settings. It can take around 1 minute
to turn back on.
6. Two Ethernet ports: Use these 2 Gigabit Ethernet RJ-45 LAN ports to connect LAN devices.
7. DC power port: Connect the power adapter that came in the package to the DC power connector.
LED Indicator States
LED STATE DESCRIPTION
Wi-Fi link indicator Blinking Not connected to a Wi-Fi router/ Ready for setup/ Other error
Solid Blue 5 GHz connection with the Wi-Fi router is connected.
Power indicator Blinking Rebooting/ Starting up/ Software update.
Solid Blue Power On
Off Power Off
WPS indicator
Blinking
Slow flash: WPS setup is available for 2 minutes then it times out.
Fast flash: WPS setup failed.
Solid Blue Solid for 20 seconds, then turns off: Successful WPS setup.
Off WPS setup not in process. The light is off most of the time.
Ethernet indicator Solid Green An Ethernet device is connected to the Ethernet port.
Note: Devices and software are constantly evolving—the screen images and icons you see here are for reference only.