Install Guide

Introduction
What’s in the box
What you’ll need
● A working Internet connection
● 802.3af / 802.3at POE Power over
Ethernet (PoE) switch, or a PoE injector*
● A smartphone or laptop
● A Phillips screwdriver or power drill with a
Phillips driver bit
● ¼ inch (6.5mm) drill bit for wall anchors
● ⅛ inch (3mm) drill bit for pilot holes
● 3/16 inch (4.5mm) drill bit for machine
screws
*To reduce potential safety issues, only use the PoE
adapter provided with the product, a replacement PoE
adapter provided by Verkada, or a PoE adapter
purchased as an accessory from Verkada.
Verkada Inc. 405 E 4th Ave, San Mateo, CA 94401
[e-mail]
All specifications are subject to change without notice
Copyright © Verkada Inc. All rights reserved.
BH61 Wireless Alarm Hub
3
Mount plate
(Attached to hub)
Mounting template
3 M4 x 50mm machine screws,
wing nuts, and washers
4 wall anchors T10 Security Torx screwdriver4 M4 x
25mm PH2
wall screws
Connect
For easy registration and setup, scan the QR
code on the product.
If you prefer to manually register your product,
please proceed to: verkada.com/start