Install Guide
Installation
Mounting 1/2
To remove the mount plate, loosen the
mount plate screws and twist the
device counterclockwise. Lift the
device vertically off the base plate
and set aside
Verkada Inc. 405 E 4th Ave, San Mateo, CA 94401
sales@verkada.com
All specifications are subject to change without notice
Copyright © Verkada Inc. All rights reserved.
Use the provided mounting
template to mark wall mount
holes. For a junction box mount,
use the mounting template to
determine the correct hole
pattern.
For a solid material like wood or metal,
drill ⅛ inch pilot holes. Drive mounting
screws directly into the pilot holes.
6
For drywall, drill ¼ inch holes. Insert
plastic anchors into holes and drive
mounting screws into anchors.