Install Guide
Installation
Mounting 2/3
Verkada Inc. 405 E 4th Ave, San Mateo, CA 94401
sales@verkada.com
All specifications are subject to change without notice
Copyright © 2022 Verkada Inc. All rights reserved.
8
At the installation location, mark the mounting
surface through the perforations in the top-right
and bottom-left of the Relay, as shown.
For a solid material like wood or
metal, drill ⅛ inch pilot holes in the
mounting surface at the marks.
For drywall, drill ¼ inch holes. Insert
plastic Wall Anchors into the holes.
Secure the Relay to the surface using
the provided Wall Screws.
VHB Mounting:
Peel the protective film from one side of
the adhesive mounting strip. Adhere to
the back side of the Relay.
Peel the remaining protective film and
affix the Relay to the mounting surface.
Wall Mounting: