Instruction manual

Albatros II
2012-09
Page 12
2.3.2 Parking brakes
Secure the two casters at the back of the
chassis by pressing the caster brake plates
down gently to their end stops with the tip of
your foot. To release the brake, push the brake
plate gently back up again with the front of your
foot until the casters are free.
2.3.3 Foot plate
The footplate  can be mounted or removed
with the hooks  to/from the chassis of the
patient hoist. If it is required for a greater
stabilization of your feet you can use the special
footrests  with velcro straps for stabilization.
2.3.4 Leg support
L WARNING: Risk of injury – Do not drop the leg support on the patient when
adjusting.
The leg support  can be mounted on the
bar of the patient hoist  with the safety pin
.
The leg support is meant to keep the legs
of the patient in the correct position and to
support the legs of the patient during stand
up.
The leg supports can be adjusted in depth and 9 different heights.
Height from footplate
to top of leg support
Position
690 mm Hole 1
665 mm Hole 2
640 mm Hole 3
Do not use Hole 4
Do not use Hole 5
495 mm Hole 6
470 mm Hole 7
445 mm Hole 8
420 mm Hole 9
Table 2: Height adjustment leg support
1 = Bar for height adjustment
2 = Lever for depth adjustment