Instruction manual

Albatros II
2012-09
Page 19
7. Pull the actuator gently out
the black clip .
8. Attach the actuator on the
cantilever arm by the
locking pin . Take care
that the actuator is
positioned very well
between the cantilever
arm.
9. Attach the footplate with the hooks to the chassis of
the patient hoist.
10. Attach the leg support  with the locking pin .
Position the leg support  to the desired height and
depth.
11. Mount the thorax
support  to the slide
column  with the
locking pin  in a
comfortable height for
every patient.