Instruction Manual

MASTER VOLUME
This control sets the overall output volume. It a!ects the rear-outputs as
well as the headphone output but it doesn't a!ect the individual synthe-
sizer channel outputs.
SELECT/SEQ
During playmodes, SELECT/SEQ will select the single notes and
sequences that will be triggered by the TRIG-buttons. Positions 1 to 4
will select single notes in di!erent octaves, positions 5 to 16 select
di!erent sequences. When in MIDI- or edit-mode, the selector switch
will set the MIDI-channel or an EDIT-parameter.
POWER
The POWER switch , located on the unit's rear, powers the PerFourMer
MKII on and o!.
Connections
HEADPHONES
Connect a headphone here. Its output volume can be adjusted using the
MASTER VOLUME control.
MAINS IN
To supply the PerFourMer MKII with voltage, connect the supplied power
cable here. The PerFourMer MKII is equipped with a switching power
supply that can handle alternating (AC) voltages from 90-240 volts at 50
or 60Hz.
MIDI IN
Use this input to connect the PerFourMer MKII to the MIDI-output of a
master-keyboard, a DAW-sequencer (using a MIDI-interface) or a hard-
ware sequencer.
MIDI THRU
The MIDI-signal arriving at the MIDI-input will be passed through to the
MIDI THRU output to be passed on to other MIDI-units that work on the
same or di!erent MIDI-channels.
Owner's Manual VERMONA PERfourMER MKII
- 23 -