Instruction Manual

6 - LEGATO
This parameter enables/disables the legato-mode. With legato enabled,
the envelope will not be retriggered with adjacent notes played
overlapping.
7 - LFO WAVE 1: SQUARE
This parameter enables/disables the alternative LFO square waveform
shape. With this function enabled, a square waveform will replace the
saw tooth waveform in the LFO.
8 - LFO MIDI CLOCK SYNC
This parameter enables/disables LFO-synchronization to MIDI-clock.
9 - INTERNAL MIDI CLOCK
This parameter enables/disables a replacement of the external MIDI-
clock by an internal clock signal.
10 - MIDI CLOCK TEMPO (TAP)
This parameter allows setting the internal MIDI-clock-tempo using the
TAP-button.
RESET
The PERfourMER MKII can be reset to factory settings. The Reset only a!ects
the EDIT parameters and MIDI channel settings. For resetting the PER-
fourMER MKII carry out the following steps:
1. Switch o! the PERfourMER MKII
2. Switch the unit on while pressing and holding the EDIT and MIDI CH
button at the same time. Once the corresponding LEDs lights up, the
reset has been made.
Owner's Manual VERMONA PERfourMER MKII
- 30 -