Manual

Control Surface Features
Input Section
The input sections features two identical input channels.
(1)
IN
balanced female XLR input
(2)
LEVEL switch with CLIP LED
With this switch you can set the appropriate
input level.
If it is set to "0dB" the channels output level
equals the input level. Settings "6dB" and
"12dB" increases the level by the
corresponding value.
The CLIP LED indicates too high input levels.
The signal doesn't distort as soon as it
illuminates, there is still some headroom.
(3)
OUT
unbalanced 3,5mm jack output
Output Section
The output section features two identical output channels.
(4)
IN
unbalanced 3,5mm input jack
(5)
LEVEL switch with CLIP LED
With this switch you can decrease the input
level.
If it is set to "0dB" the channels output level
equals the input level. Settings "-6dB" and
"-12dB" decrease the level by the
corresponding value.
The CLIP LED indicates too high input levels.
(6)
OUT
balanced male XLR output
Owner's Manual VERMONA TAI-4 - transformer-isolated audio interface
- 3 -