User Manual

Rear Panel
(7) INPUT
There are two input jacks with di"erent input levels (0dBu and
-20dBu).
Only use one jack at the same time. Don't use both jacks
simultaneously!
(8) OUTPUT
There are two output jacks with di"erent levels (0dBu and -20dBu).
Both jacks can be used parallel.
(9) EFFECT STOP
A foot switch for controlling the e"ect stop function can be
connected to this jack. The switch on the front panel (6) is out of
use when a plug is used with this jack.
(10) MAINS IN
The power cord needs to be plugged in here in order to get the
VSR-3 operational. The VSR-3 has a switching power supply and
can be used with AC voltages from 90V to 240V (50/60Hz).
(11) POWER
This switch turns the VSR-3 on/o". The LED above the EFFECT
STOP switch on the front illuminates once the unit is operational.
Owner's Manual VERMONA VSR-3 - vintage spring reverb
- 6 -